TVLogic LUM-240G 24” UHD 12G-SDI Single Link Monitor

Brand:TVLogic
Product Code:LUM-240G
  • £5,322.00

  • Ex Tax: £4,435.00

The new LUM-171G monitor supports 3G/6G/12G-SDI input - 2×3G-SDI & 2×12G-SDI. The LUM-171G combines a native 1920 x 1080 IPS LCD with SD/HD/UHD/4K input support for the most versatile monitoring and field production applications.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Assigns a colour to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements

Time Code Display

Displays the Timecode information on the screen.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.

Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

HDR Emulation

The HDR emulation function allows users to check how an HDR image will look at the shooting location. Adjustable modes are PQ, HLG and SLog3.

1:1 Pixel Mapping Modes for SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Display Spec.
Size23.8"
Resolution3840 x 2160 (16 : 9)
Pixel Pitch0.137mm
Colour Depth1.07B
Viewing Angle178°(H) / 178°(V)
Luminance350cd/m2
Contrast Ratio1000:1
Display Area527(H) x 296(V) mm
Input
4 X BNC12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
1 X HDMIHDMI Input (HDMI 2.0)
Output
4 X BNC12G-SDI A/B,3G-SDI C/D Channel (Loop Through Out)
Audio
Audio OutAnalog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
FunctionsBlue Only, H/V Delay, Marker, Mono, SingleMode
Calibration
CalibrationTVLogic Color Calibration Utility
Other Functions
REMOTETVLogic’s specification
USBAUTO Calibration, Firmware update by USB cable, Firmware update by USB memory stick
Ethernet-
ConversionSDI-to-SDI