Menu
Your Cart

TVLogic LUM-313G 31.1” True 4K Monitor with 12G

TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
TVLogic LUM-313G 31.1” True 4K Monitor with 12G

The LUM-313G is a 31.1" native 4K resolution (4096×2160) monitor with maximum luminance of 350nit, contrast ratio of 1500:1, wide colour gamut and wide viewing angle. Equipped with 4 BNCs (2×12G-SDI + 2×3G-SDI) and HDMI 2.0 interface, it supports various video formats up to 4K/60p through single-link 12G-SDI, Quad 3G-SDI and HDMI 2.0. In addition to various professional features such as Waveform monitor and Vectorscope, the LUM-313G provides HDR emulation function with HDR EOTFs of PQ, HLG and SLog3. More camera-specific HDR logs and gamuts will be supported by firmware update.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Time Code Display

Displays the Timecode information on the screen.

User Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.

Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
TVLogic LUM-313G 31.1” True 4K Monitor with 12G
  • AC Power Cord
  • Stand
  • USB Cover


Display Spec.


 Size 31.1"
 Resolution 4096 X 2160 (17:9)
 Pixel Pitch 0.1704mm
 Color Depth 1.07B
 Viewing Angle 178°(H) / 178°(V)
 Luminance 350cd/m2
 Contrast Ratio 1,500:1
 Display Area 698(H) x 368(V) mm

Input

 4 X BNC 12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
 1 X HDMI HDMI Input

Output

 4 X BNC 12G-SDI A/B,3G-SDI C/D Channel (Loop Through Out)

Input Signal

 3G SDI 2.974Gbps
 12G SDI 11.880Gbps
 HD SDI 1.489Gbps
 HDMI 480p / 720p / 1080p / 2160p

SDI Input Signal Formats

 SMPTE 425M-A/B 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/ 29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/54)
 SMPTE 296 720p (60/59.94/54)
 SMPTE 274 1080i (60 / 59.94 / 50) 1080p (30/29.97/25/24/24sF/23.98/23.102sF)
 SMPTE 260 47.95/48/50/59.94/60p)

Audio

 Audio In Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out Analog Stereo (Phone Jack)

FPGA Functions

,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Marker,  Mono,  Time Code Display,  User Aspect,  Various Scan Modes,  Waveform/Vector,  SingleMode

Closed Caption


Calibration

 TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import

Other Functions

 REMOTE  TVLogic’s specification
 USB  Firmware update by USB memory stick
 Ethernet

Options

  Carrying Case,

Dimensions

LUM-313G




£6,995.00
Ex Tax: £6,995.00
  • Model: LUM-313G
  • SKU: LUM-313G
Screen Resolution
Resolution4096x2160
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.