Menu
Your Cart

TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance

TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance

The LUM-318G is a 31.1" native 4K resolution(4096×2160)monitor with maximum luminance of 850nit, contrast ratio of 1450:1, wide color gamut and wide viewing angle.Equipped with 4 BNCs (2×12G-SDI + 2×3G-SDI) and HDMI2.0 interface, it supports various video formats upto 4K/60p through single-link 12G-SDI, Quad 3G-SDI and HDMI 2.0. In addition to various professional features such as Waveform monitor and Vectorscope, the LUM-318G provides HDR emulation function with HDR EOTFs of PQ, HLG and SLog3.More camera-specific HDR logs and gamuts will be supported by firmware update.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

blue only

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Time Code Display

Displays the Timecode information on the screen.

User Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.

Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signal

Write a review

Note: HTML is not translated!
Bad Good
Captcha
TVLogic LUM-318G 31.1” True 4K Monitor with 12G-SDI HDMI 2.0 and Enhanced Luminance
£8,995.00
Ex Tax: £8,995.00
  • Model: LUM-318G
  • SKU: LUM-318G
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.